User`s manual

XT20100820 HC8200 Flame Cutting Machine User’s Manual
4-5
processing motion command, it can compensate the motion with single axis or double axis in straight line.
Format: G01 Xn Yn
For example:
G92 X0 Y0
G90
G00 X100 Y50
G01 X-30 Y90
M02
● Current cutting torch position.
○ Expected cutting torch position.
Figure 4.3.3.1 Straight line cutting
4.3.4 G02/G03 Arc cutting
This command is used to cut an entire circle or an arc. The circle can be divided into G02 (clockwise) and
G03 (anticlockwise).
Format: G02[03] Xn Yn In Jn
For example (G02):
G92 X0 Y0
G00 X55 Y55
G02 X75 Y10 I35 J35
M02
Note: cut an arc clockwise
For example (G03):
G92 X0 Y0
G00 X55 Y55
G03 X75 Y10 I35 J35
M02
●Current cutting torch position.
○Expected cutting torch position.
Note: