User`s manual

XT20100820 HC8200 Flame Cutting Machine User’s Manual
3-55
Figure 3.4.1 manual processing
The center right of the manual interface displays the manual modes. Press F11 to switch manual modes
between manual point moving and manual self locking. In manual point moving mode, press ↖ ← ↙ ↑ ↗
→ ↘ ↓ keys to move manually, and release the keys to stop. In manual self locking mode, press ↖ ← ↙ ↑
↗ → ↘ ↓ keys to stop moving or to start moving. You can modify manual moving speed while it is stopped
and press Enter to apply the modification. When the manual moving is stopped, press ESC to return to main
interface.
3.3.3 Description to function keys
Return To Start
Under Manual interface, press F1 and the cutting torch returns to the reference zero point of the component.
It has the same function of the Return to starting point in Auto manual.
Move Distance
Under Manual interface, press F4 to enter Fixed point moving interface, as shown in the figure below: