User`s manual

XT20100820 HC8200 Flame Cutting Machine User’s Manual
3-15
The left of the files windows is the preview pane of the current shape, which displays the shape of the
corresponding file in real time. The right of pane displays the path of the processing file; the right up pane
displays the driver disk, right center displays the folder, and right down display the file. You can press Tab to
switch among different panes. In the same pane, you can press ↑and↓to select an item.
Load file
When a file is selected, press F1 to load the file and enter code editing interface. The Code editing interface
provides the functions including Edit code, Part options, Shape preview and View sheet. See Code editing
interface for details.
New File
Create a new file.
Enter U-Disk
To copy a file is to copy the file in the U-disk into the local disk, so you need to insert a U-dick before
copying. Under the Files interface, press F3 to enter Copying file interface, as shown in the figure below:
Figure 3.2.2.3 Enter U-Disk
Under Copying file interface, you can see the directory of the U-disk and the file list. Press Tab to switch
among different panes, and under the same pane, press ↑and↓to select an item. After a file is selected in the
right, press F1 to copy the file to E: of the local disk. Press F2 to copy all. Press F7 to switch between Display all