User`s manual

Chapter 3 Function and Operation
3-6
3.2.1.1 Shape library
Under the main interface, press F1 to enter Shape manager interface, which provides 37 frequently used
Shapes and one testing shape, as shown in Figure 3.2.1.1.1 below:
Figure 3.2.1.1.1 Shape library
Under this interface, you can press ←, ↑, → or ↓to select a shape, and then, press F8 to confirm and
enter the selected shape. An example is shown as follow:
Select the convex polygon with hole and press F8 to confirm, as shown in Figure 3.2.1.1.2 below: