SDS

Page 3 of 6
Autoignition
Temperature:
>800° F (>427° C)
n/a
1
1
0
NFPA
Extinguishing Media:
Carbon Dioxide, Foam
None
Unusual Fire or
Explosion Hazards:
Special Fire-Fighting
Instructions:
None
Fire-Fighting
Equipment:
Fire may produce toxic thermal decomposition products, wear a self-
contained breathing apparatus (SCBA) with a full face-piece operated in
pressure-demand or positive-pressure mode, and protective clothing.
Explosion Bottom Line:
Upper limit - not applicable.
Lower limit – not applicable.
6. ACCIDENTAL RELEASE MEASURES
Individual Precautions:
Avoid getting burns by avoiding contact with the hot melting materials.
Environmental
Precautions:
In accordance with international conventions or local regulations. Incineration
at the government-approved incineration facilities.
Cleanup:
Normal housekeeping and clean up (no special procedures).
Disposal:
Follow applicable Federal, state, and local regulations for proper disposal
procedures.
7. HANDLING AND STORAGE
Handling Precautions:
Avoid contacting the hot material with the skin.
Storage Requirements:
Store in cool dark area.
8. EXPOSURE CONTROLS – PERSONAL PROTECTION
Engineering Control:
Local ventilation recommended.
HMIS
H 0
F 0
R 0
PPE B
Control Parameters:
Time weighted average for 8 hour shift(TWA) – No data
Short Term Exposure Limit (STEL) – No data
Ceiling – No data
Biological Exposure Index (BEI) – No data
Respiratory Protection:
Though the smoke and odor generated by hot melting glue is not toxic, each
person has different sensitivity tolerances, it is recommended to wear a mask.