SDS

Page 2 of 6
Hazardous Ingredients
None
4. FIRST-AID MEASURES
Potential Health Effects
Eyes
Vapors and fumes released at or above application temperature may cause
irritation.
Inhalation
Vapors and fumes released at or above application temperature may cause
irritation of the nose, throat and respiratory tract.
Skin
Hot molten adhesive will burn and blister skin tissue.
Ingestion
Ingestion is not a likely route of exposure. Small amounts are not anticipated
to be harmful.
Carcinogenicity
IARC, NTP, and OSHA do not list Ad-Tech 220 as a carcinogen.
Medical Conditions
Aggravated by Long-
Term Exposure
No known effects on other illnesses.
Chronic Effects
No anticipated chronic effects.
Emergency and First Aid Procedures
Inhalation:
If irritation occurs, remove to fresh air. Seek medical attention if symptoms
persist.
Eye Contact:
Hot molten adhesive will adhere to and burn eye and surrounding skin upon
contact. Immediately flush affected area with cold water to cool adhesive. Do
not pull solidified adhesive from eye. Seek medical attention.
Skin Contact:
Hot molten adhesive will adhere to and burn skin upon contact. Immediately
immerse affected area in ice water. Do not pull solidified adhesive from skin.
Seek medical attention.
Ingestion:
If ingested, seek medical attention.
Note to Physicians:
This adhesive was determined by a toxicologist to be non-toxic.
Special Precautions /
Procedures:
None
5. FIRE FIGHTING MEASURES
Flash Point:
> 450° F (232° C)
Flash Point Method:
CC.