SDS

ManualsBrandsAdtech ManualsAdhesivesPro Touch Dent Repair Kit 20 oz.

Page 1 of 6

Safety Data Sheet

SDS No. 220-99

Date of Preparation: Jan. 12, 1999 Revised May 13, 2015

1. PRODUCT IDENTIFICATION

Product Name:

Ad-Tech 220

Product Description:

Hot Melt Adhesive

Suggested Purpose and

Limitations:

Bonding, adhesion

Manufacturer,

Importer, Supplier:

Adhesive Technologies, Inc.

3 Merrill Ind. Dr.

Hampton, NH 03842

Taipei Hsien, Taiwan

Phone:

(603) 926-1616

Fax:

(603) 926-1780

2. HAZARD IDENTIFICATION

Toxicity Data: Conforms to ASTM D-4236 as non-toxic.

Product is non-hazardous as defined in 29 CFR 1910.1200

GHS Label: None

Label Content: Symbol: None

Warnings: None

Hazard Warning Message: None

Hazard Prevention Measure: None

Other Hazards: Touching adhesive directly while melting by heat will

cause contact burns.

3. COMPOSITION AND INFORMATION ON INGREDIENTS

Substance Name

CAS No.

Concentration

(%)

Ethylene Vinyl Acetate

Copolymers

24937-78-8

70-90 %

Rosin Ester

8050-26-8

10-30 %

Anti-Oxidant

6683-19-8

0.02-2 %

Summary of content (6 pages)

PAGE 1
Safety Data Sheet SDS No. 220-99 Date of Preparation: Jan. 12, 1999 Revised May 13, 2015 1. PRODUCT IDENTIFICATION Product Name: Ad-Tech 220 Product Description: Suggested Purpose and Limitations: Hot Melt Adhesive Bonding, adhesion Manufacturer, Importer, Supplier: Adhesive Technologies, Inc. 3 Merrill Ind. Dr. Hampton, NH 03842 Taipei Hsien, Taiwan Phone: (603) 926-1616 Fax: (603) 926-1780 2. HAZARD IDENTIFICATION Toxicity Data: Conforms to ASTM D-4236 as non-toxic.
PAGE 2
Hazardous Ingredients None 4. FIRST-AID MEASURES Potential Health Effects Eyes Vapors and fumes released at or above application temperature may cause irritation. Inhalation Vapors and fumes released at or above application temperature may cause irritation of the nose, throat and respiratory tract. Hot molten adhesive will burn and blister skin tissue. Skin Ingestion Ingestion is not a likely route of exposure. Small amounts are not anticipated to be harmful.
PAGE 3
NFPA Autoignition Temperature: Extinguishing Media: Unusual Fire or Explosion Hazards: Special Fire-Fighting Instructions: 1 >800° F (>427° C) 0 1 n/a Carbon Dioxide, Foam None None Fire-Fighting Equipment: Fire may produce toxic thermal decomposition products, wear a selfcontained breathing apparatus (SCBA) with a full face-piece operated in pressure-demand or positive-pressure mode, and protective clothing. Explosion Bottom Line: Upper limit - not applicable. Lower limit – not applicable. 6.
PAGE 4
Personal Protective Equipment: Hand protection – heat insulated gloves Eye protection – safety goggles Skin protection – wear long-sleeved or protective clothing. Sanitary Measures: No specific requirements. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Olfactory Threshold: Not applicable pH: 7.
PAGE 5
Acute ToxicityInhalation of dust and smoke will stimulate the respiratory system. Inhalation: Skin: None Eyes: None LD50(testing animal’s absorbtion approach): 500mg/24hr(rabbit, skin) – No Data 20mg/24hr(rabbit, eyes) – No Data Chronic Toxicity or Long-Term Toxicity: None 12. ECOLOGICAL INFORMATION Ecological Toxicity: LC50 (fish)- No Data EC50 (aquatic invertebrates)- No Data Sustainable and De-toxic: Difficult to naturally degrade, but can be recycled by appropriate ways.
PAGE 6
Number: RCRA Hazardous Waste Classification: Not applicable. CERCLA Hazardous Substance (40 CFR 302.4): CERCLA Reportable Quantity (RQ): Unlisted, specific per RCRA, Sec. 3001; CWA, Sec. 311 (b)(4); CWA, Sec. 307(a), CAA, Sec. 112 SARA 311/312 Codes: SARA Toxic Chemical (40 CFR 372.65): SARA EHS (Extremely Hazardous Substance) (40 CFR 355): Not applicable. OSHA Regulations: Air Contaminant (29 CFR 1910.