Setup Guide

FCC ID: P27SCD2R0
4
LED Activity & Behavior
Doorbell
Activity
LED
Color
LED
Behavior
Description
Factory Reset
Amber
Solid
Press the reset button for 10 seconds to start
this process.
WPS Pairing
(PIN Code
Mode)
Amber
Blinking
(200ms)
When doorbell button is held down for more
than 3 seconds, the LED will start flashing
amber indicating doorbell camera is trying to
connect to your Wi-Fi network in Pin Code
mode.
WPS Pairing
(PBC Mode)
Amber
Blinking
(500ms)
When doorbell button is held down for less
than 3 seconds, the LED will start flashing
amber indicating doorbell camera is trying to
connect to your Wi-Fi network in PBC mode.
WPS Failure
Amber
Solid
(5s)
If doorbell camera falls during WPS
enrollment, the LED will be solid on for 5
seconds.
Network
Connected
(Boot-up)
Green
Blinking
(500ms)
When the doorbell camera is trying to
connect the network, LED color will change
to blinking green.
USB charge+
Battery < 80%
Blue
Blinking
(1s)
LED spinning blue indicates the camera is
charging for power.
PIR Triggered
Blue
Solid
When PIR detects motion the LED will turn
solid blue.
Doorbell
Button Press
Blue
Solid
NA
Intercom
Green
Whirling
(2s)
Green LED will pulse between dim and
medium intensity for two seconds while
waiting for interactive session.