Setup Guide

FCC ID: P27SCD2R0
13
4. Attach the doorbell camera to the mounting bracket. Make sure the doorbell camera is
firmly fixed and working properly.
Caution: To avoid damaging the rubber seal of the pogo pins, please attach the camera
to the mounting bracket flush. Mounting bracket should lay flat against the wall. Over
torqueing can warp the bracket and cause it to lose contact with pins.
Specification
LED LED x 1 (Green)
Waterproof Enclosure IP65
Pogo Pin 2 x 4 (8 Pin)
Power AC16~24V
Doorbell Attached Always on Bracket LED Activity & Behavior
Doorbell
Activity
LED
Color
LED
Intensity
LED
Behavior
Description
Bracket
Connected
Blue
Dim
Solid
After connected to the doorbell, LED color
will turn to dim blue.