Setup Guide

FCC ID: P27SCD2R0
12
Always On Bracket Installation (Optional)
The Always On bracket (may not included in the package) can only be installed with
mechanical doorbell chimes (AC16V~24V). In this configuration, the doorbell camera will be
in always on mode, which brings back the 5 second pre-buffer, connects live view faster, and
removes the need for the internal battery to be charged.
1. Use the always on bracket that will cover the hole of the legacy doorbell button.
2. Connect the power wires from the existing doorbell to the screw terminals of the bracket.
3. Secure the bracket with screws.