FHD Wireless Indoor Camera Quick Installation Guide FCC ID: P27RC845 ADT Interactive Solutions: Control & Pulse RC845 FHD Wireless Indoor Camera Property of ADT, LLC. Information accurate as of published date and is provided “as is” without warranty of any kind. ©2019 ADT LLC dba ADT Security Services. All rights reserved. ADT, the ADT logo, 800 ADT.ASAP and the product/service names listed in this document are marks and/or registered marks. Unauthorized use is strictly prohibited.
Table of Contents ADT HD Indoor Camera Quick Installation Guide FCC ID: P27RC845 Table of Contents 1 Introduction ........................................................................................................... 3 Overview ................................................................................................................... 3 Features ................................................................................................................ 3 Physical Details ...............
ADT HD Indoor Camera Quick Installation Guide Introduction FCC ID: P27RC845 1 Introduction This section provides information about the RC845 Indoor Day/Night HD Camera's features, components and capabilities. Overview The RC845 is an indoor day/night wireless camera with HD resolution and 802.11n Wi-Fi connectivity intended for use with both ADT Control® and Pulse®. Features • Standalone Design. The camera is a standalone system with built-in CPU and video encoder.
ADT HD Indoor Camera Quick Installation Guide INTRODUCTION FCC ID: P27RC845 Physical Details Front Figure 1-1 Front Panel Light Sensor—This is a hardware sensor to detect daylight level or lux. Lens—The lens is fixed and cannot be adjusted. Please ensure that the lens cover remains clean of dust and debris.
ADT HD Indoor Camera Introduction Quick Installation Guide FCC ID: P27RC845 Component Description DC Power Input Connect the supplied 12V power adapter here. Do not use other power adapters; doing so may damage the camera. Power LED On: (Green) Power on. Blinking: (Green/Amber)The power LED will blink green/amber after initial startup is completed. This indicates that the Soft AP OR WPS PIN mode is ready.
ADT HD Indoor Camera Quick Installation Guide INTRODUCTION FCC ID: P27RC845 Packaging Contents The following items are included in the package.
ADT HD Indoor Camera Quick Installation Guide Basic Setup FCC ID: P27RC845 2 Basic Setup This section provides information on how to assemble and configure the RC845 Indoor HD Camera for enrollment. Installation Assembling the Camera 1. Temporarily locate the camera close to the computer for enrollment. 2. Attach the camera stand to the camera and connect the power cable. 3. Screw/attach the camera onto the camera stand. Figure 2-1 Attaching the Camera to the Stand Power-up 1.
ADT HD Indoor Camera Quick Installation Guide Basic Setup FCC ID: P27RC845 Check the LED Status 1. Power LED—The power LED lights up solid green during startup, which takes about one minute. After startup is completed, and prior to enrollment, the power LED blinks green/amber. 2. Network/WPS LED—At power-up, the Network/WPS LED is off. o The Network/WPS LED will flash amber when the camera attempts to connect wirelessly to the Pulse gateway.
ADT HD Indoor Camera Quick Installation Guide ADT Control Enrollment FCC ID: P27RC845 3 ADT Control Enrollment This section provides instructions for wirelessly enrolling the RC845 Indoor HD Camera onto the ADT Control platform. This process uses the Soft AP method to wirelessly connect the HD Camera to the Customer’s network. Using Soft AP to Enroll Camera 1. Set up the camera as described in the previous section. 2. Connect the camera’s AC power adapter and plug it into a power outlet. 3.
ADT HD Indoor Camera Quick Installation Guide ADT CONTROL ENROLLMENT FCC ID: P27RC845 Note: Control cameras are known as tunneling devices and will connect to the Customer’s WiFi network to access the Internet to be added to the Control platform. It is imperative that the customer understands that all camera locations are limited by their existing Wi-Fi network and its range. Additionally, the Customer will need to enter their SSID password during the subsequent step. 8.
ADT HD Indoor Camera Quick Installation Guide ADT Control Enrollment FCC ID: P27RC845 13. Follow the on-screen instructions to finish adding the camera.
ADT HD Indoor Camera Quick Installation Guide ADT CONTROL ENROLLMENT FCC ID: P27RC845 4 ADT Pulse Enrollment This section provides instructions for wirelessly enrolling the RC845 Indoor HD Camera into the ADT Pulse network. This process uses the Wi-Fi Protected Setup (WPS) with PIN method to wirelessly enroll the HD Camera to the gateway via the ADT Pulse Portal or TS Installer App. Using WPS PIN to Enroll Camera 1. Set up the camera as described in section 2. 2.
ADT HD Indoor Camera Quick Installation Guide ADT Pulse Enrollment FCC ID: P27RC845 6. Locate the camera’s PIN number on the product label on the rear of the camera. 7. Enter the camera’s PIN into the WPS PIN field. Figure 4-2 Entering the PIN 8. Ensure that the camera is powered on and that the Power LED is flashing green/amber.
ADT HD Indoor Camera Quick Installation Guide ADT CONTROL ENROLLMENT FCC ID: P27RC845 9. Click the Continue button to initiate the WPS process. The following screen appears. Figure 4-3 Adding Camera Using WPS Screen 10. Press and hold the WPS/Reset button on the camera for 5 seconds to establish a wireless connection. o The Network/WPS LED flashes amber as the gateway attempts to connect to the camera. The wireless connection is successful when the Network/WPS LED turns solid green.
ADT HD Indoor Camera Quick Installation Guide ADT Pulse Enrollment FCC ID: P27RC845 The following screen is shown while the camera is configured. 11. When the Camera Details screen appears, showing that the camera has been enrolled, assign the RC845 a unique name (usually based on the location of the camera) in the Name field, and then click Save. Figure 4-5 Saving Camera Details The Pulse enrollment is complete. The newly added device is shown in the Cameras list.
ADT HD Indoor Camera Quick Installation Guide ADT CONTROL ENROLLMENT FCC ID: P27RC845 Figure 4-6 Newly Added Camera Is Shown 12. At the top of the screen, click Go Back. You are returned to the Manage Devices screen. The total number of installed cameras has increased by one. 13. Click Close. 14. Click Close again to confirm. 15. Wait until the Power LED and Network LED are both lit solid green, and then disconnect the camera from power. 16. Install the camera in its final location.
ADT HD Indoor Camera Quick Installation Guide Wall Mounting FCC ID: P27RC845 5 Wall Mounting This section provides details for final mounting of the RC845 HD Camera. You should ensure that the camera is configured and enrolled in the platform before permanently mounting it. Note: Ensure that the camera is configured and enrolled in ADT Control or Pulse before permanently mounting it. 1. Locate an unused, non-switchable, indoor outlet to plug the AC/DC Power Adapter into.
ADT HD Outdoor Camera Quick Installation Guide 8. WALL MOUNTING FCC ID: P27RC845 Slide the camera stand onto the mounting plate until it clicks into place. Figure 5-2 Attaching the Camera to the Stand to Mounting Plate 9. Remove the cable organizer grommet from the stand, insert the power cable into the hole, run the cable through the organizer slot, and insert the organizer grommet to hold the cable in place. 10.
ADT HD Indoor Camera Quick Installation Guide Wall Mounting FCC ID: P27RC845 11. Screw/attach the camera onto the camera stand. Figure 5-4 Inserting Grommet 12. Adjust the camera to the desired position and secure it firmly. 13. Verify that the camera is active on the wireless network and is recognized by the platform.
ADT HD Outdoor Camera Quick Installation Guide WALL MOUNTING FCC ID: P27RC845 Mounting Suggestion To get the best video quality for targets at night, make sure that the camera’s field of view does not include a large foreground object, such as tabletop, side wall or column. If installing on a tabletop, place the camera as close to the edge as possible. If installing on a wall, angle the camera so that a minimal portion of the wall or column is visible, as demonstrated in the photos in row 2 below.
ADT HD Indoor Camera Quick Installation Guide Troubleshooting FCC ID: P27RC845 6 Troubleshooting This section provides details for troubleshooting wireless connection issues of the RC845 Indoor Day/Night HD Camera. If the Camera Continually Goes Offline If after it is enrolled the camera continually goes offline (Power LED blinks continually), the camera will automatically attempt to recover the wireless connection.
ADT HD Indoor Camera Quick Installation Guide Appendix A FCC ID: P27RC845 Appendix A Technical Specifications Dimensions W x H x D 2.56” x 2.56” x 1.32” (65mm x 65mm x 33.5mm), without stand Operating Temperature Temp: 32°F to 104°F (0°C to 40°C); Humidity: 0% to 85% RH (non-condensing) Storage Temp. Temp: -4°F to 158°F (-20°C to 70°C); Humidity: 0% to 90% RH (non-condensing) Video Compression H.
ADT HD Indoor Camera Quick Installation Guide Appendix A If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
