Quick Installation Guide

ADT MDC845 FHD Wi-Fi Mini Dome Camera

MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide

Note: Use the alignment marks to properly align the camera and bubble while

attaching them together.

Caution: Make sure to tighten up the three screws in order to prevent

water ingress.

Caution: Be careful not to let the bubble cover the light sensor or

damage the LVDS cable while attaching the bubble to the camera.

• Make sure that the camera is firmly secured to the ceiling.

• Connect the power cable as described in “Section 2.2: Power Up”.

• Remove the retaining screw from the receptacle plate and plug the power

adapter into the lower power outlet.

• Insert the retaining screw through the opening at the top of the power

adapter and reinstall it into the receptacle, securing the adapter to the wall.

• Verify that the camera is active on the wireless network and is recognized

by the platform.