Quick Installation Guide

ADT MDC845 FHD Wi-Fi Mini Dome Camera

MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide

5 Ceiling Mounting

This section provides details for final mounting of the MDC845 FHD Wi-Fi

Mini Dome Camera. You should ensure that the camera is configured and

enrolled in the platform before permanently mounting it.

• Locate an unused, non-switchable, indoor outlet to plug the AC/DC power

adapter into. This outlet should be located as close as possible to the

location where the camera will be permanently mounted.

Caution: Do not plug in the power adapter until all the connections

are completed and the camera is fully mounted.

• Identify the location where you would like to mount the camera. Using the

mounting template included in the box as a guide, drill three mounting

holes into the ceiling.

• If you have not done so already, use the L tool to remove the three screws

and the bubble from the camera.

• If using the anchors, insert them into the mounting holes.

• Align the three mounting holes of the camera stand with the three drilled

holes, and then mount the camera stand onto the ceiling using the

provided screws.

Note: It is recommended that you route the cable through the side opening of

the mounting base.

• Make the camera angle adjustments. The camera offers 3 axis adjustments: