Quick Installation Guide

ADT MDC845 FHD Wi-Fi Mini Dome Camera

MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide

4 ADT Pulse Enrollment

This section provides examples of two different methods for enrolling the

MDC845 FHD Wi-Fi Mini Dome Camera onto the ADT Pulse network. The first

method uses a wired connection while the second method uses the Wi-Fi

Protected Setup (WPS) with PIN method to wirelessly enroll the FHD camera

to the gateway with the ADT Pulse Portal or TS Installer App.

4.1 Using a Wired Connection to Enroll Camera

Note: This method is not supported by Cloud Link, as that device does not

have a Device LAN port for making the wired connection

• Set up the camera as described in “Section 2: Basic Setup”.

- Ensure the ethernet cable is plugged into the Pulse gateway.

- Connect the camera’s power adapter and plug it into a power outlet.

- Wait for the power LED to become solid green.

• Launch an Internet browser and log in to the Pulse portal or TS Installer app.

• Enter the Manage Devices screen using one of these methods:

- For Pulse portal, select the System Tab and click Manage Devices.

- For TS Installer app, click the Pulse Devices link. The Manage

Devices screen appears.

• In the Manage Devices screen, click Cameras.

• Click the Add button located at the bottom of the screen.