Quick Installation Guide

ADT Video Doorbell

HARDWARE

INSTALLATION

DBC845 Wireless Doorbell Camera Installation

Using the Wedge Kit (Optional)

If needed, you can mount your doorbell at an angle for better view and motion

detection. The wedge kit comes with 3 plates which can be used to tilt the

camera forward or sideways by 15/30 degrees.

1. Use the two screws (No.1) to install the wedge into the wall. The larger

bracket should be used with gang box.

Figure 4-7 Install the Wedge

2. Secure the bracket to the wedge with the two screws (No.3 or No. 4).

Figure 4-8 Attaching the Bracket to the Wedge