Use and Care Manual
Applied Diamond Tools
10666 Gateway Blvd, St. Louis, MO 63132 
Phone: 636-537-5888 Toll Free: 800-980-7808
Fax: 800-758-9968
Email: sales@applieddiamondtools.com
  2
2) Use a clean sponge or lint-free cloth to apply soapy water or another mild 
cleanser to the cup face. CAUTION: To prevent liquid from contaminating the 
pump, hold the cup face-down or cover the suction hole in the filter recess. 
3) Wipe all residues from the cup face. 
4) Allow the cup to dry and reinstall the air filter. 
Inspection 
Examine and test the cup regularly to make sure it does not exhibit the 
following faults: 
• Cuts or damage to sealing edges of rubber pad. 
• Cracks or dents in handle or pump. 
• Reappearance of red line soon after attaching cup. 
• Sluggishness or dramatic changes in pump action. 
• Excessive glaze or stiffness of rubber pad. 
• Air filters missing from cup face. 
Correct any faults before using the cup (see Service). 
Storage 
Store the cup in clean, dry condition within its protective carrying case. 
WARNINGS 
Failure to observe WARNINGS could damage the hand cup or the load, or 
cause injury to the user. 
• Do not use the cup to lift loads that exceed the Maximum Load Capacity or 
the effective capacity (see SPECIFICATIONS). 
• Do not use the cup to support a person. 
• Do not place the cup face against surfaces which could damage the sealing 
edges. 
• Avoid conditions that could cause the cup to slip or to disengage 
prematurely, such as: contaminants, cuts or scratches in the cup face or 
contact surface; applying the cup to porous materials; or applying pressure 
against the cup edge. 
• Do not use the cup to lift when the red line is visible. If the red line 
reappears frequently, discontinue use and see Service. 
• Do not allow anything to interfere with free movement of the plunger while 
the cup is attached. 
• Do not touch the release tabs (on 6" [15 cm] cups) or the valve release 
lever (on other cups) while lifting. 
• Do not attach 10" [25 cm] diameter cups to thin, fragile materials. 
• Do not use harsh chemicals (such as solvents or gasoline) or unauthorized 
rubber cleaners and conditioners to clean the cup. 


