- ADT Focus 200 Plus Commercial Fire and Burglary Alarm System User Guide

– 16 –
Quick Start (cont’d)
EXERCISE: THE MORE/FIRST SELECTION
Enter your ID code and press the More selection three times. You are
now at the last Action Menu screen, and the More selection on the
screen has changed to First. Choosing First will now bring you back to
the first Action Menu screen. Repeat the steps two or three times to
verify that you have seen each screen before.
The Quit/Previous Selection
Pressing the menu selection Previous on the bottom left of each Action Menu
screen returns you to the previous Action Menu. Choosing Quit from Action
Menu 1 deactivates the operating panel.
EXERCISE: THE MORE/PREVIOUS SELECTION
Enter your ID code and press the More selection once, then press the
Previous selection. You should be back at Action Menu 1. Now choose
More three times and Previous three times. Again you should be back
at Action Menu 1. Experiment with the More and the Previous
selections until you feel comfortable navigating through the four
Action Menus.
Now return to the Action Menu 1 (choose Previous until its
designation changes to Quit). Choose Quit to return to the inactive
operating panel display.
Other Navigational Selections
Later on, when you begin working in the submenus of the FOCUS 200
PLUS system, you will encounter other navigational selections such as
Enter, Done, Next, Pgdn, and Continue. The first two are used at the end of
operations such as entering a new group name or changing an ID code. Next,
Pgdn, and Continue are specific to certain submenus. Their meaning is
similar to More in the Action Menus (i.e., they move you to the next logical
step in the programming or operational procedure).