Engine Transverse Bar w/ Support Arm Operating Instructions & Parts Manual Model Number Atd-7477 Capacity 700 lb. Atd Tools Inc.
Save these instructions. For your safety, read, understand and follow the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product.
ASEMBLY (refer Figure 2) OPERATION 1. Insert the wide leg (#13) into tube welded at the end of boom (#1) and the narrow leg (#14) to boom extension (#2). 2. Slide transfer adapter (#11) over the end of boom extension (#2) with tube toward you. 3. Insert the boom extension (#2) into boom (#1). 1. Determine the location of the two engine support bolts on your vehicle. Then place the Engine transverse bar directly over these two bolts. 2.
MAINTENANCE Periodically inspect the Engine Transverse Bar. Ensure all parts move freely. To help prevent rust, wipe clean and/or blow dry after each use. If rust appears, sand affected area and cover with suitable utility paint. Store the Engine Transverse Bar in a clean, dry area. REPLACEMENT PARTS (Refer to Figure 2 on page 3) Not all components of the Engine Transverse Bar are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
