Installation guide

ADT Pulse
®
Interactive Solutions iCamera-1000-ADT Indoor Low-Light Camera
Installation Guide
3
Physical Details – iCamera-1000-ADT
Front Panel
Figure 1: Front Panel
1. Light Sensor
Detects lighting conditions.
2. IR LEDs
The LEDs help you see clearly at night or in a dark
environment.
3. Day Camera Lens
The Day Camera Lens is used in a bright environment.
4. Night Camera
Lens
The Night Camera Lens is used in a dark environment.
5. Power/Wi-Fi
On (Green) - Power on.
Off - Power off.
Blinking - Data is being transmitted or received.
Blinking Slow - Weak strength of Wi-Fi signal. (1/2 Hz,
SNR < 15 dB.)
Blinking Medium - Strength of Wi-Fi signal is normal.
(1/2 Hz, SNR < 15 dB.)
Blinking Fast - Good strength of Wi-Fi signal. (1/2 Hz,
SNR < 15 dB.)
6. Network LED
On (Green) - Power on.
Off - No Active connection on the LAN port, or not
associated with Wireless AP.