Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 51
Click Add to add a static route. The page shown in the figure appears on the right.
The following table describes the parameters of this page.
Field
Description
Destination Network
Address
The destination IP address of the router.
Subnet Mask
The subnet mask of the destination IP
address.
Use Gateway IP Address
The gateway IP address of the router.
Use Interface
The interface name of the router output port.
IPv6 Static Route
Choose ADVANCED > Routing and click IPv6 Static Route. The page shown in
the figure appears on the right.
Click Add to add an IPv6 static route. The page shown in the figure appears on
the right.
The following table describes the parameters of this page.
Field Description
Destination Network
Address
The destination IP address of the static
route.
Use Gateway IP Address The gateway IP address of the static route.
Use Interface
The interface name of the static route.