Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 48
IGMP Snooping
Choose ADVANCED > Network Tools and click IGMP Snooping.
The page
shown in the figure appears on the right. When IGMP Snooping is enabled, the
multicast data only transmits through the specific LAN port which has received the
request report. IGMP Snooping applies to IPv4.
MLD Configuration
Choose ADVANCED > Network Tools and click MLD Configuration. The page
shown in the figure appears on the right. This section allows you to configure the
MLD setup settings of your router.
The following table describes the parameters of this page.
Field
Description
Enable Mld
Proxy
You can choose to enable MLD proxy.
WAN Connection
Choose an IPv6 WAN connection.
Enable MLD
Snooping
Multicast Listener Discovery Snooping (MLD
Snooping) is
an IPv6 multicast constraining
mechanism that runs on Layer 2 devices to manage
and control IPv6 multicast groups. By analyzing
received MLD messages, a Layer 2 device running
MLD Snooping establishes mappings between ports
and multicast MAC addresses and
forwards IPv6
multicast data based on these mappings.