Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 47
Click Add to add port mapping. The page shown in the figure appears on the right.
The procedure for creating a mapping group is as follows:
Step 1. Enter the group name.
Step 2. Select interfaces from the Available Interface list and click the <- arrow
button to add them to the grouped interface list, in order to create the
required mapping of the ports. The group name must be unique.
Step 3. Click Apply to save the settings.
IGMP Proxy
Choose ADVANCED > Network Tools and click IGMP Proxy. The page shown in
the figure appears on the right.
IGMP proxy enables the system to issue IGMP host messages on behalf of hosts
that the system discovered through standard IGMP interfaces. The system acts as
a proxy for its hosts after you enable it.
Click Apply to save the settings.