Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 33
point/wireless router. (Note: The PBC method may also need a Registrar when
used in a special case where the PIN is all zeros)
In order to use the push-button for WPS authentication, you must ensure that the
network card support the function. If it su
pports, you need not to do any
configuration. You can press the WPS button directly to enable the WPS function.
5G Advanced Settings
In anti-attenuation capability, the 2.4GHz wireless connection is superior to 5GHz connection, but in signal interference the former is inferior to the
latter.
The 5G wireless configuration parameters are similar that of 2.4GHz. Please refer to 2.4G Advanced Wireless.
ALG
Select Advanced Settings > ALG to go to the following page.
Select the NAT
ALG and Pass-Through options, and then click Submit.