Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 31
wireless network name from the default setting, enter your new wireless
network name in this field.
 Visibility Status: You can select Visible or Invisible.
 User Isolation: When many clients connect to the same access point, they
can access each other. If you want to disable the access between clients
which connect the same access point, you can select on
to enable this
service.
 Disable WMM Advertise:
After enabling this option, the transmission
performance multimedia of the voice and video data can be improved.
Click Apply to save the settings.
MAC Filtering
In the 2.4G Advanced Wireless page, click MAC Filtering, the page is shown as
the figure appears on the right. In this page, it permits access to this route from
host with MAC addresses contained in the Access Control List.
Choose a
Wireless SSID
and enable Access Control Mode. Then click
Add
to
add a MAC Address as shown in the figure appears on the right.
Click Apply to save the settings.