Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 25
Choose SETUP > Local Network. The Local Network page is shown as the
figure appears on the right.
By default, Enable DHCP Server is selected for the Ethernet LAN interface of
the device. DHCP service supplies IP settings to workstations configured to
automatically obtain IP settings that are connected to the device through the
Ethernet port. When the device is used for DHCP, it becomes the default
gateway for DHCP client connected to it. If you change the IP address of the
device, you must also change the range of IP addresses in the pool used for
DHCP on the LAN. The IP address pool can contain up to 253 IP addresses.
Click Apply to save the settings.