Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 19
Click Add in the page of INTERNET SETUP. The page is shown in the figure
appears on the right.
The following table describes the parameters in this page.
Field Description
VPI
The virtual path between two points in an ATM
network and its valid value is from 0 to 255.
VCI
The virtual channel between two points in an ATM
network, ranging from 32 to 65535 (0 to 31 is
reserved for local management of ATM traffic).
Service
Category
You can select from the drop-down list.
QoS Scheduler
You can choose Str
ict Priority or Weighted Fair
Queuing.
Protocol You can select from the drop-down list.
Encapsulation
Mode
Select the method of encapsulation provided by your
ISP. You can select from the drop-down list.
After setting, click Apply to save the settings.