Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 17
- Static IP
If the internet service you subscribed is Static IP, the Protocol is set to
be Static IP, the page shown as the figure appears on the right.
In this page, enter the IP Address, Subnet Mask, Default Gateway and
Primary DNS Server provided by your ISP.
If the Protocol is set to be Dynamic IP and Bridge, the content of the page will
be slightly different.
After settings, click Next to go to the next page.
Step 6 Configure the wireless network. Enter the information and click Next.
The following table describes the fields in this page.
Field
Description
Enable Your
Wireless
Network

To enable or disable wireless network
connection.
Wireless
Network Name
(SSID)
 Set a name for your wireless network.
Visibility status
 Visible: Your SSID can be found by wireless
clients.

Invisible: Your SSID is hided. Wireless clients
need to manually enter your SSID and connect.
Security Mode
You can choose a security mode to protect your
wireless network. It is recommended selecting
WPA2-PSK.
WPA2
Pre-Shared Key
Ente
r a password. The length of the password is
between 8-63 characters.