Specifications

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 16
Step 2 Click Setup Wizard. The page is shown as the figure appears on the
right.
Step 3 There are four steps to configure the device. Click Next to continue.
Step 4 Set the time and date, and click Next.
Step 5 Configure the Internet connection.
- PPPoE/PPPoA
Select the country and ISP. Set the VPI and VCI. If you fail to find the
country and ISP from the drop-down lists, select Others, and then click
Next. If the Protocol is set to be PPPoE or PPPoA and Connection
Type is LLC, the page is shown as the figure appears on the right.
In this page, enter the user name and password provided by your ISP.