Troubleshooting guide

frequency response 40Hz to 22kHz, ±3dB

sensitivity 91.5dB with 2.83 volt RMS pink noise measured at 1

meter

impedance 4 Ohms, nominal

recommended power 20 to 150 watts RMS

tweeter 1" / 25mm diameter driver with a copolymer dome, a

single layer, oxygen-free copper voice coil wound on a

high-temperature Kapton form, and a precision- ground

neodymium magnet structure.

woofer 6-

/2" / 165mm driver with a curvilinear profile cone

made from an injection-molded copolymer filled with an

acid metasilicate of magnesium. The woofer features a

butyl-rubber surround and a 1” oxygen-free copper wire

voice coil wound on a high temperature Kapton form.

crossover Passive hybrid LCR network with precision, low DC

resistance, high current air-core coils and low-loss, close

tolerance, high Q, polypropylene capacitors. Thre e

position tweeter level switch and tweeter polarity

switch.

specifications