Owner`s manual

3
A.The Full Cock position of the hammer
is when it is at its furthest point from the fir-
ing pin (See C). If the trigger is pulled
when the hammer is in this position, and
the safety button is in the FIRE position,
the gun will fire.
NOTE: If the trigger is pulled when the
hammer is in the Full Cock position, and
the rifle is on SAFE, the hammer will fall,
but will be stopped before it strikes the
firing pin.
B.The Half Cock position of the ham-
mer is between the Full Cock position
and the full forward position. (See D).
3. To Move the Hammer
to the Half Cock Position
First put the hammer block safety button
on SAFE. The hammer may be moved
from Full Cock to the Half Cock position by
firmly holding the hammer in the Full Cock
position with your thumb. Keep your
thumb on the hammer as you pull the trig-
ger. As soon as you feel the hammer
exerting forward pressure on your thumb,
remove your finger from the trigger and
ease the hammer slowly forward to the
Half Cock position (See E & F). The hammer
is now in the Half Cock “SAFE” position.
To resume the Full Cock position, simply pull
the hammer all the way to the rear (See C).
Full Cock
Half Cock
C
D
Full Cock to
Changing hammer position—
Half Cock
E
F