USB USB USB Turbo 2.0 WebCam User’s Guide USB USB USB USB USB USB USB USB www.adstech.com 12627 Hidden Creek Way Cerritos CA, 90703 phone 562.926.1928 fax 562.926.0518 support 562.926.
Table of Contents A letter from the President of ADS . . . . . . . . . 3 Package Contents/System Requirements . . . . . . . 4 USB Turbo 2.0 WebCam Installation Guide . . . . . 5 iSPQ software installation . . . . . . . . . . 8 Help Resources . . . . . . . . . . . . . . . . . . 11 Service and Warranty . . . . . . . . . . . . . . 12 FCC Information. . . . . . . . . . . . . . . . . 14 © 2002 ADS Technologies. All Rights Reserved First Edition: Revision 2.
A Letter from the President of ADS Technologies “Connect, Create, and Store” At ADS Technologies, Inc. we bring the best and latest multimedia technology to your PC. Our products allow you to “Connect, Create and Store”. CONNECT with our line of USB and 1394 Host and Hub devices. Today, external bus technologies such as USB and FireWire/1394 let you connect hundreds of devices to your PC or MAC. We have the connectivity solutions that allow you to get the most out of USB and 1394 technologies.
Introduction Package Contents: 1. 2. 3. 4. 5. 6. 7. 8. Fig. A: USB Turbo 2.0 WebCam iSPQ Video Chat software Yahoo Messenger iVisit Microsoft® Netmeeting TeVeo Live Web Cam User’s Guide Extendable Tripod (see Fig. A) Pull the legs out as shown by the arrow to extend and push back in to retract.
Installation Instructions: Windows XP / 2000 Hardware Installation Do not connect the device to the USB port at this time. INSTALL Device Drivers FIRST ! STEP 1. (Installing Drivers for the USB 2.0 WebCam) A. Insert the USB 2.0 WebCam CD. You will then see this screen: B. From the Auto-Run Install screen Click “INSTALL DRIVERS” first. C. Make sure you are connected to the INTERNET at this time. D. INSTALL “iSPQ VideoChat” and other applications E.
STEP 2. (Connecting the USB 2.0 WebCam) Make sure the USB 2.0 WebCam CD is in your CD ROM drive. Connect the USB 2.0 WebCam Device directly to your USB 2.0 port on the motherboard or USB 2.0 add-in card. The following windows will appear as you connect the USB 2.0 WebCam. It may take a minute or two to configure each component. Please follow these steps accordingly : Note: Windows 2000 prompts will look slightly different for all the pictures depicted here. • Click next. Your USB 2.
To verify proper hardware installation, check the System Device Manager: 1.) Click Start 2.) Select Settings, Control Panel. This will open the Windows Control Panel. 3.) Double Click “System” When the System Properties appears, click on the Device Manager tab. NOTE: For testing purposes, we have included “amcap.exe”, a Microsoft application that can access video devices. You can find amcap.exe in the “CD:/SOFWARE/MICROSOFT” directory on the CD.
Installing iSPQ (Eye-Speak) Software: Windows Note: Windows 2000 prompts will look slightly different for all the pictures depicted here. • When you begin installing your iSPQ software, a wizard like this one will open. Click “Next”. • Click “Yes”.
• Click “Next”. • Click “Next”.
• Click “Next”. Note: The program will now begin installing into your system. • After the program is installed, click “Finish” and reboot your system. You are now ready to use iSPQ. CameraView: Easy capture and preview from your WebCam. Take snapshots or capture live video from your webcam. Preview video up to 640x480 resolution on your computer screen. To install, click the “CameraView” button on the Autorun screen then follow the installation instructions.
HELP RESOURCES: ADS Web Site: www.adstech.com Support Online: We are constantly adding more information to the On-Line Help section of our web site. Click the “Support” button on the home page and select your product. Here you find support F.A.Q.’s with questions and answers to common issues, downloads, patches, manuals, and other resource material to help you get the most out of your product. For Specific software questions: Check the iSPQ web site: http://www.ispq.
Service and Warranty: Service: If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product there are several options available to you as described in the technical support section of this manual. Your primary source for information and assistance is always your computer store or computer parts dealer. If your ADS product needs repair or replacement, contact your dealer for on-site repair service.
3. Ship the product to the ADS factory with the RMA number marked on the inside and outside of the package. If there is no RMA number on the package or the RMA number has expired, the shipment will be refused. ADS will not be liable for lost or mis-shipped products. 4. Replacement product cannot be shipped to you until the defective product has been received by ADS. 5. Once the product is received at the factory it will be tested and then repaired or replaced. 6.
UNDER NO CIRCUMSTANCES will ADS Technologies, Inc. be liable for consequential damages, including but not limited to any lost savings, lost profits, or any other damages, caused by the use of any ADS Technologies, Inc. product or inability to use the product, even if the dealer or ADS Technologies, Inc. has been advised of such liability or other claims. This includes damage to property and, to the extent permitted by law, damages for personal injury.
USB USB USB USB USB North America Office 12627 Hidden Creek Way Cerritos, CA 90703 Phone: (562) 926-1928 Fax: (562) 926-0518 Support: (562) 926-4338 European Office Shannon Industrial Estate Shannon Co. Clare, Ireland Phone: +353.61.702042 Part #: 2020-511 www.adstech.
