Specifications

6 ATTO Technology Inc. FastFrame CNA Installation and Operation Manual
2 Driver Installation
Before installing your FastFrame adapter, you must configure your system to recognize it by installing drivers for
your operating system.
Note
If you already have one or more FastFrame
adapters installed and you are installing
additional adapter(s), you do not need to
perform any of these procedures unless you
are updating a previously installed driver.
The Installation CD automatically starts when inserted
in the system CD-ROM drive. Navigate the easy-to-
use HTML-based menu to find the driver for your
adapter and operating system.
The FastFrame CNA Installation CD, referred to in
these instructions, is the Installation CD that shipped
with your adapter or a folder containing the latest
downloaded and expanded driver. We strongly
recommend downloading the latest drivers, available
at
http://www.attotech.com/downloads.html
Windows
Note
Windows 8, 7, Vista, Server 2012 and 2008
may utilize a new User Account Control
Feature. Because of this there may be
additional confirmations that will need to be
performed to properly install the driver.
These confirmations normally consist of a
dialog where the user has to give Windows
permission to perform an action. If you do not
have the correct privileges during this, you
will be prompted for an actual user name and
password. You may need to contact your
system administrator if you do not have this
information.
1 Power on your system and log in as the
administrator or a user with proper
administrative privileges.
2 Insert the Installation CD. The ATTO
Installation CD guide should appear. If not,
navigate to the root of the CD and run the
AUTORUN.BAT batch file.
3 Click on Windows Driver.
4 Click Install Windows Driver next to the
appropriate item to initiate the driver setup
program.
5 Follow the on-screen instructions to complete
the driver installation.
6 The installer will also create “Network
Adapter” devices for each FastFrame port.
You can configure these Network Adapters
through the Network Connections control
panel.
Mac OS X
1 Power on your system and log in as the
administrator or a user with proper
administrative privileges.
2 Insert the Installation CD.
3 After the CD mounts, open the FastFrame
volume on the desktop.
4 Open the Drivers folder.
5 Open the folder corresponding to the OS X
version in use.
6 Launch the installer package.
7 Follow the on-screen instructions.
Linux
Note
These steps assume a basic knowledge of
Linux terminal commands. You must also
have the correct kernel header files for the
appropriate kernel already installed.
1 Power on your system and log in as the
administrator or a user with proper
administrative privileges.
2 Insert the Installation CD.
3 After the CD mounts, open the FastFrame
volume on the desktop.
4 Open the Linux folder.
5 Open the Drivers folder.
6 Open the folder corresponding to the speed of
the HBA.