Specifications

4 ATTO Technology Inc. FastFrame CNA Installation and Operation Manual
FastFrame CS11 Adapter
ATTO FastFrame™ CNAs allow customers to save
time and money by using a single network to run both
Fibre Channel SAN traffic and Ethernet general file
system/application traffic on the same lossless
network. FastFrame enables connectivity solutions
ranging from high-performance access to file servers,
through connection to industry-leading NAS systems,
to switched fully-converged FCoE topologies, without
expensive upgrades, add-ons, or hidden costs.
Backwards compatible (via auto-negotiation) for
phased upgrade to 10Gb Ethernet, FastFrame CNAs
are built with ATTO's industry-leading Fibre Channel
stack, and simultaneously support TCP/IP, iSCSI, and
FCoE, which may be configured per-port. Data Center
Bridging (DCB) provides traffic prioritization - required
for high quality of service for iSCSI, and for running
FCoE converged SANs. Single-port adapters provide
affordable high performance and the lowest power
utilization.
Technical specifications
• Simultaneously supports multiple networking
and storage protocols: FCoE, TCP/IP, iSCSI
• 400,000 IOPs per port delivers high-throughput
for critical applications
• Supports Data Center Bridging; Priority-based
Flow Control (PFC), Enhanced Transmission
Selection (ETS) and DCB Exchange (DCBX)
protocol
• Up to 10Gb/s throughput per port
• High-performance x8 PCIe 2.0 bus
Ethernet features
• Data rate per port: 10Gb/s
• Jumbo frame support up to 9,000 bytes
• Tx/Rx IP, TCP & UDP checksum offloading
(IPv4, IPv6) capabilities, Transmission control
protocol (TCP), User datagram protocol (UDP),
Internet protocol (IP)
• Large send offloads (LSO)
FCoE features
• Concurrent Logins 2048
• Active Exchanges/port 2048
• FC Class 3 support
• Protocol - FCP (SCSI-FCP)
• 400,000 IOPS per port
• FC-FDMI
• FC-GS-2/3/4
• FC-FS
• FCoE Initialization Protocol (FIP) Version 1
• Support for FC-BB-6, including VN2VN
• Target Mode
Host bus specifications
• x8 mechanical and x8 electrical PCI Express
interconnect
• Conforms to PCI Express Base Spec 2.0
• Conforms to PCI Express CEM Spec 2.0
• PCI Hot Plug spec 1.0
Environmental & physical specifications
• Length: 5.3 inches
• Height: 2.345 inches
• Operating temperature: 0 to 55 ºC (32 to 131 ºF)
• Storage temperature: -40 to 70 ºC (-40 to 158 ºF)
• Relative humidity: 10 to 90% non-condensing
• 4.7 W (typical)
• 100 lf/m (minimum) airflow recommended
• RoHS compliant
External connectivity
• Easy to install full height connection bracket;
low-profile bracket included in finished goods
packaging
• External LEDs for on-line and speed status for
each port
• Pluggable optical LC SFP+ module included
Software specifications
• Microsoft Windows Vista®, 7®, 8®
• Microsoft Windows Server® 2008, 2008 R2,
2012
• Mac OS® X 10.6, 10.7, 10.8
• Red Hat Enterprise Linux® 5.x, 6.x
• SUSE Linux Enterprise® Server 11, 11 SP1, 11
SP2
• openSUSE
TM
11.3, 11.4/CentOS 6