Installation guide

4
2. Wire It Up! (cont’d)
2. Connect your USB Instant DVD Audio to
the Sound Card on your PC. This will send
Audio from your USB Instant DVD to your
PC.
4. Connect your USB Instant DVD to your TV
or VCR. This will send captured or edited
video back to your TV or VCR for viewing or
recording.
Connect (G) RCA cable to “Video
Out” on Instant DVD
Connect other end to Video IN on your
TV or VCR.
Connect one end of your
(E) 6 ft.
male to male stereo audio cable
to the Audio Out jack at the back of
your USB Instant DVD.
Connect the other end to the Line In
jack on your sound card of your PC.
Check your diagram of connectors on
your Sound Card
USB Instant DVD
USB Instant DVD
A/V Source
PC Sound Card
uvs5_1edited.p65 12/5/01, 10:47 AM4