Installation guide

In this section we will connect all audio
and video cables that you will use to
capture audio and video and then send
audio and video back to a TV or VCR for
viewing or recording.
2. Wire It Up!
1. Connect your video source (VHS, DVD,
Laser Disc Player, TV. etc.) to your USB
Instant DVD.
Connect your (D) 6 ft. A/V In cable to
the 3 RCA jacks to your analog audio/
video source RCA Line Out.
The other end connects to the “RCA
Video In” jack and “Audio In” jack on the
back of your USB Instant DVD.
A/V Source
USB Instant DVD
uvs5_1edited.p65 12/5/01, 10:47 AM3