User Guide

DVD Xpress Page 62
DVD Xpress Page 63
Motion Menu
A menu that features animated backgrounds and/or buttons.
MPEG audio
A family of standards for low bit-rate coding of audio.
Normalize audio
This function evaluates and adjusts the audio waveform of each video clip used in a movie so that the highest peak
reaches a certain level, correcting the rest accordingly to avoid volume level variation.
NTSC
NTSC is the video standard in North America, Japan, and some other regions. Its frame rate is 29.97 fps and has a
video resolution of 720x480 pixels.
PAL
PAL is the common video standard in Europe, Australia, New Zealand, China, Thailand, and other Asian countries. It
has a frame rate of 25 fps, and has a video resolution of 720x576 pixels.
Split by Scene
A command which is applicable to captured DV AVI les in the Library. This automatically splits a single video le into
multiple clips based on the changes in recording date and time.
Se r vice an d Warrant y :
Service:
If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product there are
several options available to you as described in the technical support section of this manual. Your primary source for
information and assistance is always your computer store or computer parts dealer. If your ADS product needs repair or
replacement, contact your dealer for on-site repair service.
The ADS Technologies technical support and customer service staff can aid in solving many problems. Our technical
support department is available to repair any ADS Technologies product. You or your dealer must return products to our
factory for repair or warranty replacement.
Return/Replacement:
If you need to return your ADS Technologies product you should return the product directly to the dealer or store where
you purchased the product. Each individual computer store or dealer sets product returns policies for their customers.
ADS Technologies, Inc. cannot be responsible for the actions or policies set by our dealers. If you desire to return the
product for a refund, you must get the refund from the dealer or store you purchased the product from. If you purchased
the product directly from ADS please see the “Terms and Conditions of Sale” on the reverse side of your sales invoice.
Returns to ADS Technologies, Inc. are for repair or warranty replacement only. If you need to return product to ADS
Technologies, Inc. for repair or replacement you must follow these steps:
1. Call our Technical Support department at [phone] to obtain a Return Merchandise Authorization (RMA) number.
2. The RMA number is valid for 30 days.
3. Ship the product to the ADS factory with the RMA number marked on the inside and outside of the package. If there
is no RMA number on the package or the RMA number has expired, the shipment will be refused. ADS will not be
liable for lost or mis-shipped products.
4. Replacement product cannot be shipped to you until the defective product has been received by ADS.
5. Once the product is received at the factory it will be tested and then repaired or replaced.
6. Turn around time is approximately one week. A repaired or replacement product will be shipped back to you.
Warranty:
This ADS Technologies, Inc. product comes with a One (1) year hardware warranty. ADS Technologies, Inc. (ADS)
warrants this product against defects in material and workmanship for a period of One (1) year from the date of original
purchase from ADS or an authorized ADS dealer. This warranty applies only to the original purchase of the product and
is not transferable. This warranty does not cover any incompatibilities due to the user’s computer, hardware, software or
other related system configuration in which the product interfaces. Proof of
purchase will be required before any warranty consideration by ADS occurs.
This warranty does not cover any damage caused by negligence, non-authorized modifications, or parts installed without
prior written permission from ADS.
This warranty does not apply if the product has been damaged by accident, abuse, or misapplication, nor as a result of
service to the product by anyone other than ADS.
If your ADS product is not in working order, your only recourse is repair or warranty replacement, as described above.
UNDER NO CIRCUMSTANCES will ADS Technologies, Inc. be liable for consequential damages, including but not
limited to any lost savings, lost profits, or any other damages, caused by the use of any ADS Technologies, Inc. product
or inability to use the product, even if the dealer or ADS Technologies, Inc. has been advised of such liability or other
claims. This includes damage to property and, to the extent permitted by law, damages for personal injury. This warranty
is in lieu of all other warranties including implied warranties of merchantability and fitness for a particular purpose.
FCC Information:
Federal communications Commission Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
* Reorient or relocate the receiving antenna
.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio TV technician for help.
Notice:
(1) The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
(2) Shielded interface cables and AC power cord, if any, must be used in order comply with the emission limits.