Instruction Manual

VMT6008 32
©ads‐tecGmbH•Raiffeisenstr.14•70771Leinfelden‐Echterdingen
TouchScreenDriverInstallation

 Note:
Wheninstallingthedriver,you'llhavetotakeinaccountthatthetouchscreenmonitoris
internallyconnectedwiththeUSBinterface!
TouchscreenmonitorandPS2mousecanbeoperatedsimultaneously.

Theinstallationhastobecarriedoutasdescribedbelow:

 SwitchonPCandboot.
 Access the service CD by using the Explorer and start the Installer file in the
TouchScreenfolder.
 Followtheon‐screeninstructionsandacknowledgethelicencetermsandconditions.
 Oncetheinstal
lerhascompletedtheinstallation,shutdownthecomputerandrestart
itsubsequently.
 Afterrestarting,thetouchscreenmonitorhastobecalibrated.Ifthedriverdoesnot
automatically start, activate the setup menu via "Start => Settings => Control panel
=>EloTouchscreen".
 Viathe"Calibrationdata"menu,calibratingtheto
uchscreenmonitorcanbestarted,
and the crosses appearing in a succession on the monitor have to be pushed for
calibration. If the cursor position perfectly matches the touch point of your finger,
youcanexitthiscontrolmenubypushing"OK".

