Instruction Manual

VMT6008 21
©ads‐tecGmbH•Raiffeisenstr.14•70771Leinfelden‐Echterdingen
LEGIC
1)TotesttheRFIDfunction,selectasuitableeditor(Notepad,Word)andholdtheRFIDtag
totheRFIDreader.Thisinformationwillbeissued.
 Note:
Theoutputdatacanbe precustomized
in consultation with ads-tec
5.7 COMInput‐Configuration
TheApplicationCOMInputconvertsthedatareceivedoveraserialinterface,inkeysequencesandfeedsitthen
placeintheWindowsoperatingsystem.TherebyitispossiblethatthedataofanRFIDreaderorabarcode
scannerarriveautomaticallywithouttheactiveapplication.
Abb.12:

ThefunctionalityoftheapplicationcanbeintegratedviatheConfigurationCentersurfaceatanytimeonoroff.
Theserial‐to‐useinterfacecanbeselectedfromthelistofexistinginterfacesforactivationoftheservice.

 Note:
Baudrate:9600/Databits:8/Stopbits:1/Parity:None/FlowControl:None

 Note:
IfthefunctionalityoftheRFIDreaderhasbeentested,thecorrespondingporthas
tobedisabledandthenenabledagain,otherwiseitmaycauseamalfunction.
Pos: 25 /Datentechnik/ Schnittstellen/ Schnittstellenei nstellung/Schnit tstelleneinstel lung für VMT-Serie / PLC 500 @ 0\mod_1158916296612 _6.doc @ 517 @
