Version 1.
Tablet PCs TT13 Product Portfolio Copyright © ads-tec GmbH Raiffeisenstr.14 D-70771 Leinfelden-Echterdingen Germany 2 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 INDEX ABOUT US .......................................................................................................................................... 5 REMARKS ................................................................................................................................. 6 1 1.1 RELEVANT DATA COMMUNICATION WITH THE DEVICE ......................................................................... 6 1.2 DESCRIPTION OF THE WARNING SYMBOLS USED IN THIS GUIDE ...........
Tablet PCs TT13 6.9 WLAN................................................................................................................................ 44 6.10 BLUETOOTH ......................................................................................................................... 47 6.11 UMTS (OPTIONAL) ................................................................................................................ 48 6.12 RFID READER (OPTIONAL) ............................................
Tablet PCs TT13 ABOUT US ads-tec GmbH Raiffeisenstr. 14 D-70771 Leinfelden-Echterdingen Tel: +49 711 45894-0 Fax: +49 711 45894-990 www.ads-tec.com ads-tec GmbH provides large enterprises and globally active corporations with cutting edge technology, up-to-date know-how and comprehensive services in the area of automation technology, data processing technology and systems engineering.
Tablet PCs TT13 1 REMARKS 1.1 RELEVANT DATA COMMUNICATION WITH THE DEVICE The following documents are essential for setting up and operating this device: USER MANUAL: Contains information for installation, commissioning and operating the device along with technical data of the device hardware. a 1.
Tablet PCs TT13 1.5 COPYRIGHT This User’s Guide inclusive of all the images it contains is entirely proprietary and subject to copyright. Any irregular use of this Guide by third parties infringing copyright terms is thus strictly forbidden. Reproduction, translation, as well as electronic and photographic image storage and/or amendment processes, are subject to prior written authorisation directly by M/s. ads-tec GmbH.
Tablet PCs TT13 1.7 SCOPE OF DELIVERY The following components are included in the scope of delivery: • 1 x device • 1 x 20V DC power supply unit • 2 x batteries AS AN OPTION: 8 • 1 x DVD drive, external • 1 x transport case © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 2 OPERATING INSTRUCTIONS This device contains electrical voltages and extremely sensitive components. The manufacturer, or a service partner authorised by the manufacturer, should be consulted if you plan to make any modifications. For this type of work, the device must be switched off at the mains and the power lead must be disconnected. Suitable measures for avoiding electrostatic discharge towards parts of the components when touching the equipment must be taken.
Tablet PCs TT13 2.3 WARRANTY / REPAIRS During the unit warranty period, any repairs thereto must strictly be conducted solely by the manufacturer or by service personnel that has been duly authorised by the manufacturer. 2.4 HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES This device contains a lithium battery to supply the systemclock until there is no power supply connected. Depending on exposure, the battery has a lifetime of 3-5 years. Note: High thermal exposure will age the battery faster.
Tablet PCs TT13 2.6 EXTERNAL DEVICE DIMENSIONS © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 3 COMMISSIONING The power supply connection and interfaces of this device are installed at the side of case. All supply leads and all required data leads have to be connected before starting commissioning. Warning: The device must be switched off before connecting or disconnecting any cables in order to prevent damage to the electronics! The device may only be switched on after acclimatising to the ambient temperature in order to avoid condensate accumulation.
Tablet PCs TT13 3.2 READINESS FOR OPERATION CHECKS Accurately check the unit for any hidden damages possibly incurred during improper transport and/or handling or wrong operation site and/or storage conditions (e.g. smoke emissions or formation by the unit, etc.). If any damages are found, the unit must be decommissioned or scrapped. Ensure that it is safe from accidental re-implementation. 3.3 TOUCHSCREEN The control system is equipped with an analogue, resistive touchscreen.
Tablet PCs TT13 4 FRONT PANEL FUNCTIONS 4.1 STATUS INDICATORS This device is equipped with different status LEDs in the front. These LEDs indicate current events, like the system activity state, the current accumulator charge status and WLAN activities.
Tablet PCs TT13 WLAN LED INDICATORS Static Device is not connected with a WLAN network Static Device is connected with a WLAN network Flashes Device is connected with a WLAN network and has data traffic BLUETOOTH LED INDICATORS Static Static Flashes © ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen Bluetooth module is disabled. Bluetooth module is enabled.
Tablet PCs TT13 4.2 FRONT CONTROL KEYS The keys on the front panel are occupied with the following functions by a specific driver in the soft keyboard: SYMBOL: FUNCTION: ON / OFF pushbutton for the device (approx. 0,5 seconds delayed) Shift key (SHIFT) for activating the second keyboard level.
Tablet PCs TT13 Warning: The front control keys should not be operated with a touch stylus but with the fingers, only. Note: All function keys in the front panel, except for the ON / OFF pushbutton and the Fn button, have 2 function levels each. The primary function is activated by simply pushing the respective key. The second function level (small symbol to the top right) can be activated each time by pushing the Fn key first, and then additionally pushing the desired function key.
Tablet PCs TT13 5 INTERFACES 5.1 20V DC POWER SUPPLY TECHNICAL DATA OF THE POWER ADAPTER • Power consumption: Max. 70 Watts • Input voltage: 100…240 V AC • Mains frequency: 50…60Hz • Current consumption: 3.5A (230V AC) • Max. switch-on current: < 60A (230V AC) Note: The typical power consumption of this device is indicated in the "Technical details" chapter. 5.2 14.
Tablet PCs TT13 BATTERY STATUS REPLACEMENT The TT13 batteries can be removed by using a mechanical ejector on the back of the device. The batteries status can be retrieved by pushing a button on the batteries. The batteries display will light up for a few seconds and show the current batteries charge status on a scale from 0 to 100. If the display lights red, this represents a weak battery. If the display is green, it shows that the battery is fully charged.
Tablet PCs TT13 5.3 USB CONNECTIONS The USB interfaces are used for connecting peripherals with USB connection. The interfaces comply with the USB 2.0 standard. PIN NUMBER SIGNAL NAME 1 VDC 2 D- 3 D+ 4 GND Note: The two side USB ports together have a current limit of 1.5A. This allows trouble-free operation of external devices, like an external DVD drive. The in-depth USB interface is designed according to the standard for 0.5A. 20 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 5.4 ODU-INTERFACE (OPTIONAL) By using the SD Connector, the device can be connected to an Ethernet network (10/100 Mbit). Data throughputs of 10MB can be achieved with a maximum cable length of 5m. Note: This interface does not allow booting via the network. If you want to boot the device via the network connection, we recommend using the LAN interface.
Tablet PCs TT13 PIN-OUT: RS232 PIN-NUMBER SIGNAL NAME 1 DCD 2 RxD 3 TxD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 NC The SD Connect cable must be connected so that the red markers match. For disconnecting the SD Connect cable, it must be pulled rearwards in the area marked in green. This loosens the snap-in mechanism at the end of the plug. Note: The interface is always shown in the network connections, even if the interface is not available regarding the configuration of the device.
Tablet PCs TT13 VIEW: NETWORK CONNECTION (EXEMPLARY) 5.5 NETWORK CONNECTION (RJ45) If the drivers required for functioning are installed on the device, the control system may be integrated in an Ethernet network supporting the 10/100 Mbit standard by using the Ethernet 10/100BaseT network connector. Specifications of this network topology must be observed in this case. PIN NUMBER SIGNAL NAME 1 TX + 2 TX - 3 RX + 4 NC 5 NC 6 RX - 7 NC 8 NC © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 5.6 MIC IN An external microphone can be connected via the MIC IN socket on the device by means of a 3.5mm cinch cable. PIN NUMBER SIGNAL NAME Ground GND R Signal, right-hand side L Signal, left-hand side MICROPHONE IN FRONT PANEL Additionally, the device has an internal microphone in the front panel. This microphone can be configured by using the volume control integrated in the operating system. 24 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 5.7 LINE OUT By using the Line Out socket of this device and connecting via a 3.5mm cinch cable, a stereo audio signal can be output to earphones or to external speakers. 5.8 PIN NUMBER SIGNAL NAME Ground GND R Signal, right-hand side L Signal, left-hand side EXPRESSCARD SLOT The device is equipped with an ExpressCard slot, which supports the following ExpressCard types. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6 SOFTWARE & DRIVER INSTALLATION The device will be delivered with a pre-installed Windows operating system on request by the customer. The drivers required for this are already installed and the operating system will be enabled by entering the licence information. Should an initial installation be required, please follow the following steps.
Tablet PCs TT13 STATUS DETAILS The Status Detail page lists all starting page data in a table. STATIC INFORMATION The "Static Information" tab displays all detail information, e.g. the manufacturer, and the capacity of the lithium-ion accumulator. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 DIAGNOSTICS The Diagnostics tab gives information about the proper function and about the number of used lithium-ion accumulators. 28 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6.2 TT13 HDD PROTECTION Note: The application is attended to protect the read-/write cycle of the hard disk. Via a sensor, sudden kinetic changes or agitation is being recognized. To prevent damage and possible data loss, the reading head will be placed to a neutral position. The application is used to control the HDD Protection drivers and services. It will start minimized and adds the tray bar a icon.
Tablet PCs TT13 CONFIGURATION The Configuration of the application is done by the file c4hddshock.ini The following settings are possible: Parameter Options LanguageId Parameter to change the language of the surface. Right now the parameter can be DE or EN. LANGUAGES At the moment the languae English and German is supported by the application. The text is configured in the lang directory under c4hddshock_de.txt and c4hddshock_en.txt. The languages can be added by further files.
Tablet PCs TT13 6.3 TT13 WIRELESS KONFIGURATION Hinweis: The application is intended to activate/ deactivate the whole hardware in the device, which is intended for wireless data communication. Die Anwendung dient zur kompletten Aktivierung / Deaktivierung der Hardware im Gerät, welche für drahtlose Datenkommunikation dient.
Tablet PCs TT13 WIRELESS CONFIGURATION: STANDARD VIEW 32 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 WIRELESS CONFIGURATION: BLUETOOTH CLASS-SWITCH © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6.4 TT13 TOUCH ROTATION Note: The service enables the loading for the best configuration for 0° and 90°. If the button landscape/portrait is activated, the switch from 0° to 90 takes effect. Pushing the button again will switch back to 0°. Note: Every kind of exposure needs to be calibrated once via the 25 point calibration. 34 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 ELO TOUCH 25 POINT CALIBRATION The calibration of the ELO Touchscreen can be done via the application in the control panel. Note: If you want to start the calibration for the 90°-View, you first have switch the display calibration via the landscape/portrait button before beginning the ELO Touchscreen calibration. Start the calibration of the Touchscreen via the button “Adjust” © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 Tip the Touchscreen at the marked positions and finish the calibration with the green check. Finally the application can be closed with OK. Note: Before configuring another display view, the ELO Touchscreen application needs to be closed and subsequently started with the new display view. Warning: After successful configuration the application needs to be quit with OK, otherwise the calibration will not be saved. 36 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6.5 TT13 MONITORING Note: The application is pretended to monitor the temperature and the fan of the TT13. The application starts minimized and is not visible until a fault is recognized. If a fault is recognized, the temperature or the fan icon in the traybar will be displayed. Illustration1: Traybar Icon A Warning is displayed additionally while the icon is faded in.
Tablet PCs TT13 LANGUAGES At the moment the languae English and German is supported by the application. The text is configured in the lang directory under C4Monitoring _de.txt and C4Monitoring _en.txt. The languages can be added by further files. The Ending of the file matches the code for the language which has to be added in the INI-File under LanguageID. With this text, the files for warning can be customized. 6.
Tablet PCs TT13 6.8 INSTALLATION OF THE TT13 SOFTWARE PACKAGE Note: With the TT13 Software Tools hardware components can be controlled, monitored and evaluated. In case of high exposure the Software Tools will help to prevent lasting damage by protecting important hardware components actively. In diagnostic cases the Software Tools will give information about the system condition and enable fast troubleshooting. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 Start the TT13 Tools Installation Vx.x.exe. Verify with OK. Followed by a click on Next Choose the directory where the Programs should be installed. It is recommended to use the Default Path. Verify with Next 40 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 The folling dialogue box allows you to choose the Software Tools needed. Note: If device drivers are not installed, the functionality of system components like LED display will maybe not work properly. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 Verify with Continue Verify with Next Verify with Next 42 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 The Installation procedure starts … After successfull installation you can exit the Setup by clicking on Finish. If the Default Installation Path was used, the ads-tec tools are installed in: Start Program Files TT13 Tools © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6.9 WLAN The device is equipped with a wireless network card. If the operating system supports this card via drivers, the device can be integrated into a Ethernet Network with Support for 11 Mbit or 54Mbit (802.11 a/b/g). The specifications of this network topology has to be attended. Note: The device is equipped with a Mini PCI WLAN Card with Atheros Chip. If a device is delivered with a operating system from ads-tec, the needed system drivers will be integrated into the system.
Tablet PCs TT13 CONFIGURATION OF THE COUNTRY CODE The default Installation of the WLAN driver, which is provided by Service-CD, installs the driver with the country code “United States”. The channels 1-11 are used. The country code can be changed later. The following chapter shows how to change the country code. 1) Open the control panel Start Control panel 2) Open the network connection via double click. 3) Choose your wireless network connection via right mouse button and click on Properties.
Tablet PCs TT13 4) 46 The now showing dialgouebox you have to chosse configure © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 5) Change to the tab Advanced. Choose the country in value to the desired country. 6.10 BLUETOOTH Note: Detailled Information with the keyword Bluetooth can be seen in Windows Help which is located in the path: Start Help & Support © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6.11 UMTS (OPTIONAL) The TT13 device is equipped with a mini PCI Express card of the Sierra Wireless MC8775V type. By using the UMTS card, audio and data signals can be transmitted.
Tablet PCs TT13 Insert the SIM card in the SIM card drawer as shown in the picture. Push the SIM card drawer back into the device with the SIM card facing down. Connecting the headset A commercially available headset including microphone communication. Connect the headset as shown in the figure. is required for proper Note: This figure shows how to connect the headset via a cinch cable. Modern headsets also offer the opportunity to be operated by using a USB port.
Tablet PCs TT13 3G WATCHER The integrated 3G Watcher software controls the functions of the built-in Sierra Wireless MC8775V PCI Express Card. The following dialogue window will appear once the SIM card was inserted. Now enter the PIN code of your SIM card in the dialogue window and confirm by pushing Send. Once the PIN code was entered successfully, the main menu of the 3G Watcher software will appear. The appropriate network operator for the SIM card should be recognised after a few seconds.
Tablet PCs TT13 By using the Language tab, a numeric pad is shown. Now you can enter a phone number by using the numeric pad. Click on the green handset icon in order to start the dialling process. The duration of the connection is displayed with an active connection. During the phone conversation, the headset volume can be increased or decreased in the highlighted section. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 INTERNET VIA UMTS The Internet can be used via the UMTS broadband network. The 3G Watcher software includes default WWAN providers, which are activated by creating a profile. Open the connection administration by using ToolsConnections Click on the following icon in order to create a new profile. Subsequently select your WWAN provider (network operator of your SIM card) from the pull down menu. 52 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 Confirm your selection first by pushing Save, and subsequently with OK. The profile of your WWAN provider is now enabled and will appear in the main menu of the 3G Watcher. Please select your provider from the pull down box. Subsequently click on Connect. A pop-up window will appear if the connection was established. Now the received and sent packets will be displayed. If you'd like to disconnect from the Internet, please click on Disconnect. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 54 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 SMS FUNCTION This software offers the opportunity of sending short messages (SMS). In order to use this feature, open SMS Express in the ToolsSMS Express menu. The main window opens now. By pushing New, you can now edit a short message (SMS) in an additional dialogue window. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 Select To and add a contact from your phone directory or enter a phone number manually. As soon as your message was created, you'll click on the Send button. The message is now in the message Outbox and will be sent to the specified receiver. Note: The design of the SMS Express user interface is similar to the Microsoft® Office Outlook® E-Mail Client design. 56 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6.12 RFID READER (OPTIONAL) By using the RFID reader, passive RFID TAGS (RFID chip / keycard) are available for automatic system login. The user applies the RFID tag like a key and requires neither user name nor password. For authentication, the keycard or the RFID chip are held in front of the position highlighted in the figure. The information from your keycard or RFID chip is read and evaluated by the device. This way, access rights of persons, e.g.
Tablet PCs TT13 ADS-TEC RFID-READER TOOL The RFID reader can be controlled via the integrated "ads-tec RFID-Reader" software. The application communicates with the RFID reader of the TT13 device via the serial interface. This application is configured automatically, i.e. when the program is started, all COM ports are searched for the serial interface of the RFID reader. If the RFID reader was located, a figure showing in front of which area the keycard / RFID chip must be held, is displayed.
Tablet PCs TT13 Once the authentication succeeded, the serial numbers received will be output. If no RFID reader was located, a message is output. This application supports German and English as languages. You can change the language via the "Rfid.ini" file by entering either "LanguageId = DE" or "LanguageId = EN". © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6.13 CAMERA (OPTIONAL) The integrated camera gives the opportunity of recording photographic or video data. The camera has the following characteristics: Optical resolution: 1/3.2 inch Pixel size: 2.8 um Max. frame rate: 15fps @ UXGA Effective resolution: 1600 x 1200 UXGA (Format: 4:3) / 2 megapixels Auto focus: AF CAMERA MODULE ACTIVATION Open the Control Panel of your operating system by using the path: Start Control panel Now start the Scanner and camera wizard.
Tablet PCs TT13 Start the Scanner and camera wizard by clicking on the camera icon. Confirm the message shown by clicking on Next. In the following dialogue window, a picture preview, which allows you to take a photo, will appear on the left-hand side. Once the camera has automatically focussed on the selected object, the photo can be created by pushing the Take photo button. Then click on Next. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 62 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 Select a suitable name and storage location in the following dialogue window. Confirm this with Finish. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 6.14 SOFT KEYBOARD By using the soft keyboard, data can be entered via the touchscreen like with an external keyboard. Note: The soft keyboard of the TT13 device can be delivered in 25 languages. Depending on the selected language, the soft keyboard representation and function may vary. Basic functions are identical in all languages.
Tablet PCs TT13 NUMERIC KEY-PAD VIEW: Switch to representation of the function-key bar Note: Continuing Information to the Softkeyboard can be taken from the Softkeyboard User Manual. FUNCTION-KEY BAR VIEW: Note: If a function is to be activated, which requires pressing two keys at the same time (e.g. Alt + F4), these keys have to be pushed one after another at the soft keyboard, and the special keys Shift, Alt and Ctrl must always be pushed first.
Tablet PCs TT13 7 ACCESSORIES 7.1 DVD DRIVE / EXTERNAL TYPE (OPTIONAL CONNECTION The DVD drive can be connected to the TT13 device by using the USB interface. DRIVER INSTALLATION Required drivers will be installed automatically, as soon as the DVD drive is connected with the USB interface. FUNCTIONS The TT13 device must be switched on to open the drive. After pushing the Eject button, the drawer jumps open and must be pulled out completely.
Tablet PCs TT13 7.2 LASER PRODUCT SAFETY This product has been designed and manufactured according to FDA regulations "title 21.CFR. chapter1, subchapter J. based on the Radiation Control for Health and Safety Act of 1968". This product is also classified as a class 1 laser product. There is no hazardous invisible laser radiation during operation, because invisible laser radiation emitted inside of this product is completely confined in the protective housings.
Tablet PCs TT13 7.3 TRANSPORT CASE The optionally available transport case features protected transport of the device. By the way the transport case offers the opportunity to store accessories like batteries, power supply and Software. Exterior view: Interieur view: 68 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 7.4 BATTERY CHARGING STATION C4/TT13 Optionally there is the opportunity to charge the battery of the device by an battery charging station. The battery charging station features two battery slots. This allows you to charge two batteries parallely. CONNECTING THE 20V DC POWER SUPPLY Before commisioning the battery charging station, a 20V DC power supply has to be connected. Connect the power supply at the back of the battery charging station.
Tablet PCs TT13 INSERTION OF THE BATTERIES The batteries need to be placed into the battery slots to get a connection between the pins of the battery charging station and the battery. Note: If the battery is placed correctly into the battery charging station a signal tune will sound and the charging process starts. If the battery gets removed a signal tune is sounding too. 70 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 LED STATUS DISPLAY During operation, different system activities will be displayed. READY-LED DIPLAY BEHAVIOR - DESCRIPTION No battery inserted static battery completely charged static battery is defective CHARGE-LED DISPLAY - battery is not charging flashing battery is charging SYS-LED DISPLAY device is not connected via power supply (power supply/battery) - © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 PICTOGRAPHIC ILLUSTRATION Battery is charging Battery completely charged Device is not ready / Defective power supply Battery defective 72 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 7.5 SUBSTITUTION POWER SUPPLY Optional a substitution power supply for operating the device is available. 7.6 CAR POWER SUPPLY Optional a car power supply for the device is available. The device can be comfortably supplied with power in vehicles. 7.7 SUBSTITUTION-BATTERY Optional a substitution battery for operation is available. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 7.8 TT13 MECHANICAL DOCKING ADAPTER The available TT13 Docking offers in combination with the Table Stand -/ Wall bracket a stable mounting solution for every kind of location. Via the Docking-Connector on the backside, the device can be connected to a DockingStation. The Docking is available in two different types. The first layout can only be used as a attachment for the device.
Tablet PCs TT13 MOUNTING THE DEVICE TO THE DOCKING 1) The Device needs to be placed on the red marked area behind the turquoise marked area. 2) The Device has to be pressed onto the Docking. The Device should engage perceptible. REMOVE THE DEVICE FROM THE DOCKING 1) Press turquoise coloured unlocking downwards and hold it this way 2) Bend the device forwards 3) Release the device upwards and remove it from the Docking. The shown Docking-Solution displays the mechanical Engaging.
Tablet PCs TT13 7.9 TABLE STAND The available TT13 Docking offers in combination with the Table Stand -/ Wall bracket a stable mounting solution for every kind of location. Mount the Docking via the supplied M5x30-8.8 SW Inbus screws to the Table Stand. 76 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 7.10 WALL BRACKET The available TT13 Docking offers in combination with the Wall bracket a stable mounting solution for every kind of location. 1) The Wall Bracket needs to be mounted via VESA 75 or 100 to the installation site. 2) The Docking needs to be mounted via the supplied M5x30-8.8 SW Inbus screws to the Wall Bracket. 7.11 SUBSTITUTION PACK OF TOUCH STYLUS The substitution pack of Touch stylus contains three touch stylus for comfortable handling of the device.
Tablet PCs TT13 7.12 3 POINT CORD Optional a 3 Point Cord for mobile Work is available. The 3 Point Cord can be mounted directly onto the device and makes the device to a mobile workstation. 3 x DZ-MECH-33255-0 3 x DZ-MECH-31033-0 1 x DZ-MECH-31039-0 MOUNTING THE 3 POINT CORD ONTO THE DEVICE 1) First the cord guides need to be mounted. Although the required mounting possibility for left and right handers has to be choosen.
Tablet PCs TT13 2) Mount the screws as shown in the picture to marked positions. Note: Tighten the screws with max. 120 Ncm. The Cords should be movable but without loosening the screws. MOUNTED VIEW FOR RIGHT HANDED OPERATION 3) The Cord can be added via the carabine intro the Cord guides. The Device is prepared for mobile operation. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 80 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 7.13 HAND STRAP Alternative to the 3 Point Cord, a Hand Strap for mobile work is available. The Hand-Strap can be mounted directly to the device and makes it to a mobile workstation. 2 x DZ-MECH-33255-0 1 x DZ-MECH-31045-0 MOUTNING THE HAND STRAPS TO THE DEVICE 1) The Hand Strap has to be mounted at the marked positions 2) Mount the Hand Strap as shown in the picture. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 Note: Tighten the screws with max. 120 Ncm.. 3) Mounted View of the Hand Strap 82 © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 7.14 ODU 10POL TO RS232 ADAPTERCABLE 1M The ODU 10pol. RS232 adapter cable enables the connection of the device via the RS232 interface of the connectable device. 7.15 PROTECTION BEZEL The optional available protection bezel offers protection against transport damage. © ads-tec GmbH • Raiffeisenstr.
Tablet PCs TT13 8 CERTIFICATIONS 8.1 CERTIFICATIONS / TESTS The TT13 system has the following certifications: CE compatibility EN 61000-6-3:2007 Electromagnetive Emission, Klasse B EN 55022:2006 Electromagnetive Emission EN 61000-6-2:2005 Electromagnetive Emission EN55024:1998+A1:2001+A2:2003 Electromagnetive Emission UL/cUL201 USL/CNL E217133 GOST-R certificate Device complies with standard WLAN certificates for 802.11 a/b/g EU countries (ETSI) 2,400 MHz – 2,483.
Tablet PCs TT13 8.2 ELECTROMAGNETIC COMPATIBILITY (EMC) Certificate of acceptance in accordance with the Federal Electromagnetic Compatibility Act in Germany ("EMVG") of 2007 (respectively the EMC Directive no. 2004/108/EC). In accordance with the Federal Electromagnetic Compatibility Act in Germany, this device is authorised to carry the EC conformity sign "CE". Liable party for this conformity declaration is according to para.
Tablet PCs TT13 8.3 FCC APPROVAL Note: This device complies with part 15 of the FCC Rules [and with RSS-210 of Industry Canada]. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Note: Changes or modifications made to this equipment not expressly approved by ads-tec GmbH may void the FCC authorization to operate this equipment.
Tablet PCs TT13 9 TECHNICAL DETAILS 9.1 9.2 9.3 DISPLAY DATA Display 13.3" TFT, WXGA 1280 x 800 pixels Display colours 262.144 colours Touchscreen Resistive 5-wire touchscreen COMPUTER DATA Processor Intel Pentium M Yonah ULV 1.06GHz Core Solo 423, Intel ULV 1.2GHz Core Duo (optional) RAM 1GB DDR2 SO DIMM PC2-5300 2GB DDR2 SO DIMM PC2-5300 (optional) Chip set Intel 945 GME Graphic memory 945 GME Northbridge max.
Tablet PCs TT13 10 SERVICE AND SUPPORT ads-tec and appointed partner companies offer you comprehensive maintenance and support services, ensuring quick and competent support should you have any questions or concerns with regard to ads-tec products and equipment. ads-tec products may also be provided and installed by partner companies. Such devices may have customised configurations.
