User Manual Owner's manual

RAC2000series 16
©ads‐tecGmbH•Raiffeisenstr.14•70771Leinfelden‐Echterdingen
4.2 OperationalLEDStatusDisplays
4.2.1 StatusDisplayActivitieswhenBooting
ThebootingprocessstartsasoonastheRAC2000deviceisconnectedwithapowersource.Youcancheckifthe
devicebootsbyusingtheHOSTLEDs.Bymeansofthefollowingdiagram,thecorrectbootingprocesscanbe
tracedbywatchingtheflashingfrequencyoftheLEDs.NoHOST
cableisconnectedinthiscase.
 Note:
IftheWLANinterfaceisenabledinthefirmware,theRAC2000deviceis
permanentlylookingforWLANnetworksoncethebootingiscompleted.

Abb.4:

WLAN(1)/(2) Signal Action
LeftLEDLink

DeviceissearchingforavailableWLAN
networks.


HOST Signal Action
LeftLEDLink

LEDsblinktwicebriefly
RechteLEDLink

LEDsblinktwicebriefly
RightLEDACT LEDblinkfast
RightLEDACT LEDturnsout


POWER Signal Action


Thedeviceissuppliedwithpowervia
Powerandisready

