Owner's manual

OPC8013/OPC8015/OPC8022 23
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Pos: 18 /Datentec hnik/Inbetriebn ahme/Reihenfolg e der Inbetrie bnahme/Reihe nfolge der Inbetrie bnahme für VMT 60xx-Seri e @ 1\mod _1222073159179_ 6.doc @ 4100 @
4.2 Cable installation
The interfaces and the device power supply plug are located in the service slot of the device.
4.3 Order of steps during commissioning
•24V DC device: insert cable for power supply with cable end sleeves into terminals
•Connect cable for serial / parallel data transmission and fasten the plugs to the sockets
•Plug in all other required cables and secure against slipping out.
Pos: 19 /Datentec hnik/Inbetriebn ahme/Betriebsb ereitschaft prüf en/Betriebsbereit schaft prüfe n für OPC/CPC/ PLC/OTC/ITC/ VMT-Serie(+Mo nitore) / IPC 5 100/5500/2400/1 100 @ 0\mo d_115890557 8361_6.doc @ 3 81 @
4.4 Check for operational readiness
Check the device for hidden damages caused by improper transport, incorrect operation/storage
conditions or improper use (e.g., smoke emissions from the device, etc.). If damages are found,
immediately shut down the device and protect it against unintentional startup.