Manual

ManualsBrandsADS-TEC ManualsComputersOPC7008

Industrial PCs OPC7008

6 INTERFACES

6.1 INTERFACE SETUP

INTERFACE IRQ ADDRESS

COM1 4 3F8h

COM2 3 2F8h

Pos: 27 /Datentechnik/Schnittstellen/Spannungs versorgung/Spannungsversorgung für OPC7000-Serie @ 2\mod_1270724385376_6.doc @ 7572 @

6.2 24 V DC POWER SUPPLY

This power supply is provided to the device by using a lead-through terminal with a screw

connection. (The figure shows the socket inside the device)

Technical data of the power adapter

• Input voltage: 19…29V DC

• Max. switch-on current: 7A (10ms)

Pos: 28 /Date ntec hni k/Schnitts tell en/US B-Ansc hlus s/USB- Ansc hluss f ür OPC / IPC / C PC / PLC / OTC / ITC / VMT / M SD-S erie @ 0\m od_1158923823971_6.doc @ 547 @

6.3 USB CONNECTIONS

The USB interfaces are used for connecting peripherals with USB connection. The interface

complies with the USB 2.0 standard.

PIN NUMBER SIGNAL NAME

VDC

D -

D+

GND

Note:

The USB interfaces can be locked by using the "Lock USB" software tool.

USB

CONNECTION IN THE FRONT PANEL

One USB interface can be accessed from the front. The interface is located under a plastic

cover underneath the display. The cover has a tab on the right-hand side, which is used

for opening. The plastic cover of the USB interface must be returned in protective position

after use.

Pos: 29 /Datentechnik/Schnittstellen/PS2/Kombi Buchse für VMT 60xx @ 2\mod_1268840073235_6.doc @ 7482 @

PIN NUMBER SIGNAL NAME

1 24 V DC

2 PE

3 0 V DC