Manual

Industrial PCs OPC7008
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
21
5.3 TOUCH SCREEN
The control system is equipped with a touch screen monitor. The touch screen monitor is
internally connected with the USB interface. The driver software required for using the
touch screen is integrated in the corresponding operating system, or can alternatively be
installed from the enclosed service CD.
Pos: 25 /Datent ech nik/Be dienu ng/St atus- Anzeig en/ SYS- LED/S YS-LED für OPC / CPC / PLC / OTC / ITC / VMT (+ Monit ore) - Ser ie / IPC 5100 / 5300 / 5500 / 1100 @ 1\mod_1204714132162_6.doc @ 3405 @
5.4 STATUS INDICATORS
SYS LED (BICOLOURED)
Depending on the colour and type of flashing, different device states are displayed by the
SYS LED.
The following signals are displayed:
• LED lights green The device is ready for operation (Power ON).
• LED is off The device is switched off. (POWER OFF)
Pos: 26 /Datent ech nik/Sc hnitts tell en/Sc hnitts tell enein stell ung/Sc hnitt stell eneins tell ung für OP C700 8 @ 2\mo d_12 70819 08736 9_6.d oc @ 7582 @