Instruction Manual

Industrial PCs MCR5000
26
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
5.2 USB CONNECTIONS
The USB interfaces are used for connecting peripherals with USB connection.
PIN NUMBER SIGNAL NAME
1
VDC
2
D -
3
D+
4
GND
Note:
The USB interfaces may be locked using the Lock USB software tool. You'll find the
software and the documentation on the service CD.
T
OP USB INTERFACE
One USB interface can be accessed from the front. The interface is located under a plastic
cover. The cover has a tab on the right, which is used for protecting the USB connection.
Note:
All USB interfaces available meet the USB 2.0 standard.
5.3 SIM CARD READER ACCORDING TO ISO 7816
The SIM card reader is currently under preparation for future use.