User Manual

IF1000series 37
©ads‐tecGmbH•Raiffeisenstr.14•70771Leinfelden‐Echterdingen
6.2 ManualNetworkadapterconfiguration

 Note:
ThenotesbelowhavebeencreatedbyusingWindowsXP®.Shouldyouusea
differentoperatingsystem,thedirectorypathsandpropertiesdescribedhere
mightvary.
OpenthePropertiestabofthenetworkadapteryouareusing.Thedirectorypathis:
Start>Settings>Networkconnections>LANconnections>Properties.
Selectthefollowingoptioninthepop‐updialogue:Internetprotocol(TCP/IP);thenclickonProperties.
Abb.8:

Hereselectthefollowingitem:UsefollowingIPaddress
AccesstothedevicewillonlybeenabledoncethefollowingparametershavebeenenteredasthefixedIP
address,orifthecomputerislocatedinthesamesubnetarea:
IPAddress:192.168.0.100
 Note:
(Thelastsectionof
digitsmustrepresentanumberbetween1and253;thevalue"100"
wasselectedintheexample)

OncetheIPaddressisentered,youhavetoinputtheSubnetmaskaddress.IfyouclickintotheSubnetmaskbox,
thecorrectaddressisautomaticallyentered.

SubnetMask:255.255.255.0
Youcannowclosethedialogueboxesbypushingthe"OK"button.
