Instruction Manual

ADS XiLog+ System User Manual

Ignore Daylight Savings

Selecting this checkbox prevents the clock in the XiLog+ from compensating

for daylight savings time.

Host and Alarm Numbers

When performing remote data reporting via SMS, the XiLog+ transmits the

data to all the host numbers designated in the Contact Details section. A host

number corresponds to a GSM modem connected to a computer. The

Primayer Data Manager utility running within Windows serves as the

conduit through which the data is transferred from the GSM modem to the

PrimeWorks software for viewing. Up to three host numbers may be entered

in PrimeWorks, allowing data delivery to up to three different offices or

locations.

Up to two additional alarm numbers also may be entered. Any SMS alarms

generated by the logger will be sent to these numbers. The logger sends data

only to the host number(s); however, it sends alarms to both the host and

alarm numbers, when necessary.

Note: To use the Primayer XMS system for remote data delivery over

the Internet, select the Use XMS Host checkbox and then select the

appropriate network from the corresponding drop-down list. Choosing

this option does not require entering any additional numbers or contact

information. All distribution of data occurs within the XMS system.

FTP Server Address

This field displays the address of the FTP server to which the logger should

transmit the data. When using the Primayer XMS delivery system, enter

www.waterlogger.co.uk. When using another FTP server, enter the address

without an FTP prefix.

FTP Username

This field displays the username for logging onto the FTP server. Enter the

appropriate username for the user.

Note: When using the Primayer XMS system, defer to ADS Client

Services to obtain the proper login details.