Instruction Manual

ADS XiLog+ System User Manual

From Last Readback

Choosing this radio button ensures PrimeWorks collects only the data

recorded by the logger since the last readback was performed.

Note: Clicking on the Quick Readback button on the title bar or the

Readback button corresponding to a logger in the Connected

Loggers drop-down list accomplishes the same operation as selecting

the From Last Readback option.

All Data

Choosing this radio button ensures PrimeWorks collects all the data available

in the logger to the PC. If several months of data are available in the logger,

this process may take several minutes.

Custom Dates

Choosing this radio button ensures PrimeWorks collects data from the logger

for the range indicated in the From and To fields. Selecting this option

enables the From/To calendar options. Designate the start and end dates of

the data for readback from these fields. The dates available for selection are

limited to the dates for which data is available in the logger.

Channels to Readback

(applicable only when collecting data remotely) Select the checkboxes

corresponding to the channels representing the data desired for readback. The

list contains only the channels that are available for readback.

After selecting the readback options and clicking on the Readback button,

PrimeWorks initiates the readback process and displays the progress on

screen. When performing a readback via USB, PrimeWorks calculates and

displays the estimated time of completion.

Save Configuration

Selecting this option saves the current configuration for the selected logger to

the PrimeWorks database.

Note: Selecting the program or readback options automatically saves

the configuration.