Manual

ADS PrimeLog User Manual
21
Other Flow Meters
Interfacing the PrimeLog instruments with other flow meter sensors requires
an adequate knowledge of the power requirements of these sensors. The
following table specifies the power interface:
Powering Standard Sensors
Type Sensor Power Source
1 - Contact
Closure
Kent PSM/LRP/MSM/PU10
Kent Helix 4000 Reed Switch
Meinecke/Socam K01/K505R/K510/RO2.2/RD022
Schlumberger Model S/Cyble LF/Cyble HF
Data logger
2 Kent HRP/PU100 Data logger
3 Kent BPG20
Meinecke/Socam OPTO06/OPTO OD06
Schlumberger TLOS
Auxiliary unit
4 ABB Kent-Taylor Aquamag/Aquaprobe
ABB Kent-Taylor Magmaster
Internal
5 Kent Combination Meter Data logger
6 Combination Meter - non-Kent Auxiliary unit
The following table provides the typical battery life for the auxiliary battery
unit powering the Type 3 sensors:
Sensor Battery Life
Kent BPG20 94 days
Socam OPTO06 215 days
Schlumberger
TLOS
9 days