Manual

Parameter Tree B-3
Parameter Menu (PAR) Part 2
3 active only if “subdivide geometry” = 3
channel shape(s)
area bottom
U-Profil
area middle
custom shape x
height-width
height-area
area top
round pipe
channel geometry
area bottom depending on previously selected
profile prompting fo r, h/w, r/h,
lower/upper w/h or h/Q
area middle
depending on selection
height-width or height-area table
area top enter r, total height and
section height
level
sensor type
air-US NIVUS
water-US inter.
2 Leiter Sonde
constant level
pressure int.
4 following layers (only at combination of min. 2 sensors ) 2
mounting offset (not at ‘constant level’ or ext. sensor)
height h 0.000
height H 0.500
scale (only at ext. sensor as well as combination)
offset 0
span 1
delay time 18
height (only in case of fixed value)
select layers