Manual

Specifications A-3
Cable Length
33/49/66/98/328 feet (10/15/20/30/50/100 m); the cables available for
sensors with the integrated pressure measurement cell do not 98
feet (30 m)
Cable Types
• Sensors with pressure measurement:
LiYC11Y 2x1.5 + 1x2x0.34 + PA 1.5/2.5
• Sensors without pressure measurement:
LiYC11Y 2x1.5 + 1x2x0.34
Outside Cable
Diameter
• Sensors with pressure measurement:
0.38 ±0.01 inches (9.75 ±0.25 mm)
• Sensors without pressure measurement:
0.33 ±0.01 inches (8.4 ±0.25 mm)
Sensor Types
• Flow velocity sensor with velocity measurement using cross-
correlation and temperature measurement to compensate for the
effect of temperature on the velocity of sound
• Combination sensor with flow velocity sensor using cross-
correlation, depth measurement via water-ultrasonic, and
temperature measurement to compensate for the effect of
temperature on the velocity of sound
• Combination sensor with flow velocity sensor using cross-
correlation, depth measurement via pressure, and temperature
measurement to compensate for the effect of temperature on the
velocity of sound (wedge sensor only)
• Combination sensor with flow velocity sensor using cross-
correlation, depth measurement via water-ultrasonic, redundant
depth measurement via pressure, and temperature
measurement to compensate for the effect of temperature on the
velocity of sound (wedge sensor only)
Types of
Construction
• Wedge sensor for installation on pipe bottom
• Pipe insertion sensor for installation through pipe wall with
sensor screw joint and retaining element
Medium
Contacting
Materials
Polyurethane, stainless steel 1.4571, PPO GF30, PA (wedge sensor
only)
Option: PEEK chemical-resistant sensor; Hastelloy C-276 mounting
plate; Titanium mounting plate, FEP-coated cable